Se habla español
Se habla español
Energy Saving Insulation
Our Mission
Most properties in Garner are losing energy through gaps, uninsulated cavities, and outdated materials that were never the right fit to begin with. At Energy Saving Insulation, we approach every project with a clear goal: seal what is leaking, protect what is working, and reduce what homeowners and business owners are paying each month. As a BBB Accredited, SPFA member insulation contractor, we bring Garner, NC over 20 years of combined industry experience to every job. From the first assessment to the final inspection, we deliver insulation services built around your property's specific needs.

We're proud to be a
BBB ACCREDITED BUSINESS
We Have Helped
300+
CUSTOMERS

We're proud to be an
SPFA Member

50+
REVIEWS
Stop Attic Energy Loss Before It Impacts Your HVAC System
Hot attics are one of the most consistent problems in Garner homes, and the insulation underneath them is usually the reason. When air leaks go unsealed, your HVAC compensates by running longer than it should.
Our team installs open-cell spray foam insulation that expands into every crack and cavity, creating an airtight seal that makes your attic part of the solution. As the insulation contractor near Garner, your neighbors trust, we size every application to your roof deck and actual climate conditions.
Crawl Space Moisture Problems You Should Not Ignore
Crawl spaces pull in outside air, trap moisture, and quietly drive up utility bills season after season. Standard batts compress over time and lose their rated R-value, leaving gaps that defeat the purpose.
Closed-cell spray foam insulation forms a rigid, vapor-resistant barrier that seals the crawl space completely and adds structural reinforcement to the floor above. When you work with an insulation company in Garner that understands below-grade conditions, you stop treating the symptom and start fixing what is actually wrong.
The Real Problem With Uninsulated Metal Structures
Metal buildings transfer heat faster than almost any other structure, and once condensation sets in, the damage moves quietly through walls and ceilings before it ever surfaces. Proper commercial insulation services address both problems at once.
Our team applies closed-cell spray foam directly to the metal substrate, bonding to the surface and eliminating the gap where condensation forms. For an insulation company near Garner that handles commercial structures with the same precision as residential work, we bring that standard to every project.
Affordable Insulation That Still Delivers Reliable Performance
Not every project calls for spray foam, and that is exactly why fiberglass batt insulation remains a strong choice for walls, attics, and standard stud-cavity applications across Garner homes. The problem is not fiberglass itself, but the compressed, low-density installation that sags, gaps, and underperforms within the first few years.
Our fiberglass batt insulation installation includes proper friction-fit placement, full coverage verification, and no shortcuts on density. When an experienced insulation contractor in Garner installs fiberglass batts the way they are designed to perform, the results hold.
Everything You Need
Attics and Roof Decks
The attic is where the largest share of conditioned air escapes in most Garner homes. Open-cell spray foam applied to the roof deck converts it into a thermal buffer, reducing HVAC load and stabilizing indoor temperatures. For homeowners seeking home insulation services that target root-cause energy loss, attic insulation delivers the highest return.
Crawl Spaces and Foundations
Crawl spaces introduce moisture, cold floors, and outside air into the living areas above them. Closed-cell spray foam seals walls and rim joists completely, protecting structural wood and reducing utility costs. For both residential and commercial insulation services, the right insulation contractor in Garner makes the improvement measurable from the first billing cycle.
Walls, Cavities, and New Construction
Wall cavity insulation determines how well a building holds temperature against the outside air. For new construction across Garner, getting this right at the build stage eliminates costly retrofits. Our insulation installation services cover both residential and commercial new builds, ensuring every cavity is sealed and verified before drywall goes in.

Lightweight and highly expansive, open-cell spray foam insulation reaches into irregular cavities that batts and rigid boards cannot fully cover. It seals air leaks, reduces sound transmission between rooms, and works effectively in attics, interior walls, and ceilings throughout Garner homes and commercial spaces.
Energy Saving Insulation uses open-cell foam as part of a broader whole-property approach, identifying where air movement is costing the most and addressing those areas with precision. The result is a noticeably quieter, more evenly tempered interior throughout every season.

Closed-cell spray foam insulation delivers the highest R-value per inch of any insulation material we install, making it the right choice for crawl spaces, basements, exterior walls, and metal buildings where moisture and structural strength both matter. Its rigid form bonds directly to surfaces, adds shear strength to walls, and creates a vapor barrier that standard insulation materials cannot replicate.
For Garner homeowners and business owners managing older structures or high-humidity environments, this is the material that solves multiple problems in a single application without requiring follow-up repairs.


Fiberglass batt insulation is a proven, cost-effective solution for standard wall cavities, attic floors, and interior partitions across residential and commercial properties. When installed at the correct density and thickness, fiberglass performs reliably for decades.
The gap between good and poor fiberglass installation comes down to compression and coverage — two areas where many contractors cut corners. Energy Saving Insulation treats every batt installation with the same standard as spray foam: verified fit, full coverage, and no voids. For Garner properties on a defined budget, this is home insulation services done properly
Built on Standards, Not Shortcuts
BBB Accredited and SPFA member, bringing verified insulation contractor near Garner with credentials that most local companies do not carry.
Over 20 years of combined industry experience, including hands-on R&D in open-cell and closed-cell spray foam formulations at the national manufacturer level.
Bilingual team serving Garner's English and Spanish-speaking communities, with the same standard of service across every project. Se habla español.
Detailed post-installation reports provided on request, proving every application meets industry performance standards for insulation installation services.
Homeowners are often surprised to learn that their insulation was never the problem. The installation was. Compressed fiberglass batts lose their rated R-value the moment they are forced into a cavity too small for them. Low-density spray foam kits sold at hardware stores expand inconsistently, leaving voids that no amount of additional coats can fully correct. Some crews apply genuine two-pound closed-cell foam in thin, uneven passes to finish faster, which defeats the material's structural and moisture-resistance properties entirely. As the insulation contractor that Garner homeowners call when a previous job falls short, we verify every application against performance standards before we consider the job complete.
A Proven Path to Your Perfect Space

Share your vision, and we’ll help refine it with expert advice.

Receive a custom plan tailored to your needs.

Our team handles every step of the project, from installation to cleanup.

Access cost savings and comfort for years to come.
TESTIMONIALS
What Our Clients Say About Us

Wayne Bullock

Oscar and his crew are very professional. They insulated a 30 x 30 shop. They did the walls and ceiling for me and what a tremendous difference it made in the temperature. It stays cooler in the summer and warmer in the winter. . Thanks guys you all were awesome

Grant Shonkwiler

Communication was clear, the price was fair, the team were great to work with on site and they were able to walk me through some prep work that I was unaware needed to be done for drywall. I highly recommend the team and will use them again in the future.

Nita Godwin

These gentlemen were timely and efficient. Their work was done neatly! I have received several compliments on the work they did!! I wouldn’t hesitate to hire them again. They exceeded my expectations from start to finish, and their professionalism truly stood out.
Still Not Sure?
Frequently Asked Questions
Look for credentials like BBB accreditation and SPFA membership, which indicate the contractor meets verified industry standards. Energy Saving Insulation is a fully insured, BBB-accredited insulation contractor near Garner with over 20 years of combined experience.
We provide open-cell spray foam, closed-cell spray foam, and fiberglass batt insulation services for both homes and commercial properties. Every project includes a free consultation and a detailed plan tailored to your property's specific conditions.
Yes, both open-cell and closed-cell spray foam insulation are well-suited to North Carolina's hot, humid summers because they seal air leaks and control moisture movement. Closed-cell spray foam adds a vapor barrier that is especially effective in crawl spaces and below-grade areas common in Garner homes.
Open-cell spray foam insulation is lighter, more flexible, and ideal for attics and interior walls where soundproofing and air sealing are the priority. Closed-cell spray foam insulation is denser, delivers a higher R-value per inch, and provides moisture resistance for crawl spaces, basements, and metal buildings.
Yes. Energy Saving Insulation provides commercial insulation services for metal buildings, pole barns, warehouses, and commercial facilities throughout the Garner area. Our team assesses each structure individually and recommends the insulation type that addresses both energy and moisture challenges specific to commercial construction.
Fiberglass batt insulation is a cost-effective solution for standard wall cavities and attic floors, delivering solid performance when installed at the correct density and coverage. Spray foam insulation outperforms batts in areas with irregular cavities, high moisture exposure, or where a continuous air barrier is required.
Our insulation installation services include an initial property assessment, a customized insulation plan, professional installation by certified technicians, and a final inspection confirming coverage and performance. On commercial and larger residential projects, we provide detailed reports verifying that every application meets industry performance standards.
Call us today or schedule your consultation online.
Request a Quote or Contact Us
Energy Saving Insulation